Ostatní výsledky
Výběr podle způsobu zveřejnění:
C: Konferenční příspěvek (zahraniční konf.) (1375)
E: Elektronický dokument, audiovizuální tvorba (4)
G: Konferenční sborník (zahraniční konf.) (23)
L: Prototyp, funkční vzorek (15)
L1: Normy, právní předpisy, směrnice (7)
L4: Software (12)
O: Ostatní výsledky (7)
P1: Užitný a průmyslový vzor (1)
U: Uspořádání akce (2)
Všechny ostatní výsledky (1446) Doktor Tomáš, Valach Jaroslav, Kytýř Daniel, Jiroušek Ondřej, Kostelecká M.
Sysno: 359886
ZpZverejneni: C
AutoriVsichni: Doktor, T. - Valach, J. - Kytýř, D. - Jiroušek, Ondřej - Kostelecká, M.
AutoriAV: Jiroušek, Ondřej
AutoriVsichniPocet: 5
AutoriAVPocet: 1
BiblCit: Doktor, T. ; Valach, J. ; Kytýř, D. ; Jiroušek, Ondřej ; Kostelecká, M. Improvements of an Analysis Tool for the Pore Size Distribution Assessment. In 10th Youth Symposium on Experimental Solid Mechanics Chemnitz : Chemnitz University of Technology, 2011. S. 45-46. ISBN 978-3-941003-34-7. [Youth Symposium on Experimental Solid Mechanics /10./, Chemnitz, 25.05.2011-28.05.2011, DE].\nhttp://www.tu-chemnitz.de/mb/FestKoerpMech/YSESM/proceedings.php
BiblCitZdrD: In 10th Youth Symposium on Experimental Solid Mechanics. Chemnitz : Chemnitz University of Technology, 2011. S. 45-46
ISBN_ISSN_ZdrDok: 978-3-941003-34-7
ZemeZverejneni: DE
Jazyk: eng
PocStran: 2
ProjektyCEP: GAP105/10/2305:GA ČR
VyzZamer: CEZ:AV0Z20710524
OrigNazev: Improvements of an Analysis Tool for the Pore Size Distribution Assessment
KlicSlova: image analysis - pore size distribution - trbecular bone
AnotaceOrig: Knowledge of the inner structure is an important prerequisite for estimation of mechanical properties of heterogeneous materials. This article is focused on assessment of pore size distribution of a porous material. Improvements of the analysis procedure and of the software tools are presented. For the comparison of reliability of the presented method specimena of various origins were tested. As representatives of biological materials specimena of human and porcine trabecular bone were tested, as representatives of artificial materials synthetic pumice and frit glass were used. Images required for the image analysis were captured using a CCD camera, a high resolution flatbed scanner and a confocal microscope.
AnotaceCz:
KodOborRIV: JJ
Konference: Youth Symposium on Experimental Solid Mechanics /10./. Chemnitz (DE), 25.05.2011-28.05.2011
VlastnikZaznamu: UTAM-F
OdevzdaniDoRIV: 1
RokVydani: 2011
RokSberu: 2012
PocetCitaci: 0
Sysno: 359886
ZpZverejneni: C
AutoriVsichni: Doktor, T. - Valach, J. - Kytýř, D. - Jiroušek, Ondřej - Kostelecká, M.
AutoriAV: Jiroušek, Ondřej
AutoriVsichniPocet: 5
AutoriAVPocet: 1
BiblCit: Doktor, T. ; Valach, J. ; Kytýř, D. ; Jiroušek, Ondřej ; Kostelecká, M. Improvements of an Analysis Tool for the Pore Size Distribution Assessment. In 10th Youth Symposium on Experimental Solid Mechanics Chemnitz : Chemnitz University of Technology, 2011. S. 45-46. ISBN 978-3-941003-34-7. [Youth Symposium on Experimental Solid Mechanics /10./, Chemnitz, 25.05.2011-28.05.2011, DE].\nhttp://www.tu-chemnitz.de/mb/FestKoerpMech/YSESM/proceedings.php
BiblCitZdrD: In 10th Youth Symposium on Experimental Solid Mechanics. Chemnitz : Chemnitz University of Technology, 2011. S. 45-46
ISBN_ISSN_ZdrDok: 978-3-941003-34-7
ZemeZverejneni: DE
Jazyk: eng
PocStran: 2
ProjektyCEP: GAP105/10/2305:GA ČR
VyzZamer: CEZ:AV0Z20710524
OrigNazev: Improvements of an Analysis Tool for the Pore Size Distribution Assessment
KlicSlova: image analysis - pore size distribution - trbecular bone
AnotaceOrig: Knowledge of the inner structure is an important prerequisite for estimation of mechanical properties of heterogeneous materials. This article is focused on assessment of pore size distribution of a porous material. Improvements of the analysis procedure and of the software tools are presented. For the comparison of reliability of the presented method specimena of various origins were tested. As representatives of biological materials specimena of human and porcine trabecular bone were tested, as representatives of artificial materials synthetic pumice and frit glass were used. Images required for the image analysis were captured using a CCD camera, a high resolution flatbed scanner and a confocal microscope.
AnotaceCz:
KodOborRIV: JJ
Konference: Youth Symposium on Experimental Solid Mechanics /10./. Chemnitz (DE), 25.05.2011-28.05.2011
VlastnikZaznamu: UTAM-F
OdevzdaniDoRIV: 1
RokVydani: 2011
RokSberu: 2012
PocetCitaci: 0
© ÚTAM AV ČR, v. v. i. 2008 | přihlásit se ( pouze pro zaměstnance)