Publikace
Výběr podle způsobu zveřejnění:
A: Abstrakt (10)
A2: Abstrakt ze sborníku (15)
B: Monografie kniha jako celek (37)
D: Dizertace (12)
H: Konferenční sborník (tuzemská konf.) (4)
J: Článek v odborném periodiku (464)
K: Konferenční příspěvek (tuzemská konf.) (84)
M: Část monografie knihy (68)
N: Článek v novinách (4)
R1: Recenze z periodika (3)
R2: Recenze ze sborníku (3)
V: Výzkumná zpráva (96)
Z: Poloprovoz, ověřená techn., odrůda/plemeno, léčeb. postup (1)
Všechny publikace (801) Cikrle P., Drdácký Miloš, Lesák Jaroslav, Slížková Zuzana, Válek Jan, Vavřík Daniel, Zíma Pavel
Sysno: 106095
ZpZverejneni: V
AutoriVsichni: Cikrle, P. - Drdácký, Miloš - Lesák, Jaroslav - Slížková, Zuzana - Válek, Jan - Vavřík, Daniel - Zíma, Pavel
AutoriAV: Drdácký, Miloš - Lesák, Jaroslav - Slížková, Zuzana - Válek, Jan - Vavřík, Daniel - Zíma, Pavel
AutoriVsichniPocet: 7
AutoriAVPocet: 6
BiblCit: Cikrle, P. ; Drdácký, Miloš ; Lesák, Jaroslav ; Slížková, Zuzana ; Válek, Jan ; Vavřík, Daniel ; Zíma, Pavel. DELIVERABLE D9.6 Small sample testing 2004. 38 s.
ZemeZverejneni: XE
Jazyk: eng
PocStran: 38
OrigNazev: DELIVERABLE D9.6 Small sample testing
KlicSlova: small samples - mortar - stone
AnotaceOrig: A number of in-situ tests for mechanical material properties is readily available but there were developed improved methodologies which met the requirements and specifics of this project. It the case of historic masonry there was necessary to deal with a common additional problem, which is the testing of non-standards samples. This was for example a problem of testing of historic bedding mortars or renders, where a typical width of sample is around 10 mm. It comes along with the general need for small ů micro samples with regards to the protection of historic masonry where a minimum intervention is always required. Mechanical properties in bending were tested on non-standard mortar samples which were supplemented symmetrically on both ends with two 'prostheses'. According to the results of the tests comparing the flexural strength of pure mortar beams with the strength ascertained on prosthesized identical material the influence of prosthesization is negligible. Testing of stone samples involved comparison of the compressive and split tensile strength of specimens of standard dimensions and specimens of smaller dimensions
AnotaceCz:
KodOborRIV: JN
VlastnikZaznamu: UTAM-F
OdevzdaniDoRIV: 0
RokVydani: 2004
RokSberu: 2005
PocetCitaci:
Sysno: 106095
ZpZverejneni: V
AutoriVsichni: Cikrle, P. - Drdácký, Miloš - Lesák, Jaroslav - Slížková, Zuzana - Válek, Jan - Vavřík, Daniel - Zíma, Pavel
AutoriAV: Drdácký, Miloš - Lesák, Jaroslav - Slížková, Zuzana - Válek, Jan - Vavřík, Daniel - Zíma, Pavel
AutoriVsichniPocet: 7
AutoriAVPocet: 6
BiblCit: Cikrle, P. ; Drdácký, Miloš ; Lesák, Jaroslav ; Slížková, Zuzana ; Válek, Jan ; Vavřík, Daniel ; Zíma, Pavel. DELIVERABLE D9.6 Small sample testing 2004. 38 s.
ZemeZverejneni: XE
Jazyk: eng
PocStran: 38
OrigNazev: DELIVERABLE D9.6 Small sample testing
KlicSlova: small samples - mortar - stone
AnotaceOrig: A number of in-situ tests for mechanical material properties is readily available but there were developed improved methodologies which met the requirements and specifics of this project. It the case of historic masonry there was necessary to deal with a common additional problem, which is the testing of non-standards samples. This was for example a problem of testing of historic bedding mortars or renders, where a typical width of sample is around 10 mm. It comes along with the general need for small ů micro samples with regards to the protection of historic masonry where a minimum intervention is always required. Mechanical properties in bending were tested on non-standard mortar samples which were supplemented symmetrically on both ends with two 'prostheses'. According to the results of the tests comparing the flexural strength of pure mortar beams with the strength ascertained on prosthesized identical material the influence of prosthesization is negligible. Testing of stone samples involved comparison of the compressive and split tensile strength of specimens of standard dimensions and specimens of smaller dimensions
AnotaceCz:
KodOborRIV: JN
VlastnikZaznamu: UTAM-F
OdevzdaniDoRIV: 0
RokVydani: 2004
RokSberu: 2005
PocetCitaci:
© ÚTAM AV ČR, v. v. i. 2008 | přihlásit se ( pouze pro zaměstnance)