Publikace
Výběr podle způsobu zveřejnění:
A: Abstrakt (10)
A2: Abstrakt ze sborníku (15)
B: Monografie kniha jako celek (37)
D: Dizertace (12)
H: Konferenční sborník (tuzemská konf.) (4)
J: Článek v odborném periodiku (464)
K: Konferenční příspěvek (tuzemská konf.) (84)
M: Část monografie knihy (68)
N: Článek v novinách (4)
R1: Recenze z periodika (3)
R2: Recenze ze sborníku (3)
V: Výzkumná zpráva (96)
Z: Poloprovoz, ověřená techn., odrůda/plemeno, léčeb. postup (1)
Všechny publikace (801) Sebera V., Kotlínová M., Tippner J., Kloiber Michal
Sysno: 347581
ZpZverejneni: J
AutoriVsichni: Sebera, V. - Kotlínová, M. - Tippner, J. - Kloiber, Michal
AutoriAV: Kloiber, Michal
AutoriVsichniPocet: 4
AutoriAVPocet: 1
BiblCit: Sebera, V. ; Kotlínová, M. ; Tippner, J. ; Kloiber, Michal. Numerical simulation of elastic wave propagation in wood with defined tree rings. Wood Research, 2010, Roč. 55, č. 3, s. 1-10. ISSN 1336-4561.
BiblCitZdrD: Wood Research, 2010, Roč. 55, č. 3, s. 1-10
ISBN_ISSN_ZdrDok: 1336-4561
ZemeZverejneni: SK
Jazyk: eng
PocStran: 11
ImpFaktor: 0.369
ProjektyCEP: GPP105/10/P573:GA ČR
VyzZamer: CEZ:AV0Z20710524
OrigNazev: Numerical simulation of elastic wave propagation in wood with defined tree rings
KlicSlova: elastic wave propagation - experimental testing - numerical simulation
AnotaceOrig: The objective of the study was to perform a finite element (FE) simulation of elastic wave (EW) propagation in wood (Picea abies spp.). Based on measuring of tree rings width a FE model of wood with defined tree rings, substituted as an ideal annulus, was created. FE model was loaded to force impulse at different positions via the specimen length. Subsequently a propagation and travel timeof the EW through a material was observed. FE simulations were compared to the experimental ones acquired by different non-destructive acoustical tools (ADD, Geotron, FAKOPP and TICO). Results say that the FE model preserves trend of velocities of EW obtained from experiments, although comparing to them it embodies lower EW velocities in general.
AnotaceCz:
KodOborRIV: JN
VlastnikZaznamu: UTAM-F
OdevzdaniDoRIV: 1
RokVydani: 2010
RokSberu: 2011
PocetCitaci: 0
Sysno: 347581
ZpZverejneni: J
AutoriVsichni: Sebera, V. - Kotlínová, M. - Tippner, J. - Kloiber, Michal
AutoriAV: Kloiber, Michal
AutoriVsichniPocet: 4
AutoriAVPocet: 1
BiblCit: Sebera, V. ; Kotlínová, M. ; Tippner, J. ; Kloiber, Michal. Numerical simulation of elastic wave propagation in wood with defined tree rings. Wood Research, 2010, Roč. 55, č. 3, s. 1-10. ISSN 1336-4561.
BiblCitZdrD: Wood Research, 2010, Roč. 55, č. 3, s. 1-10
ISBN_ISSN_ZdrDok: 1336-4561
ZemeZverejneni: SK
Jazyk: eng
PocStran: 11
ImpFaktor: 0.369
ProjektyCEP: GPP105/10/P573:GA ČR
VyzZamer: CEZ:AV0Z20710524
OrigNazev: Numerical simulation of elastic wave propagation in wood with defined tree rings
KlicSlova: elastic wave propagation - experimental testing - numerical simulation
AnotaceOrig: The objective of the study was to perform a finite element (FE) simulation of elastic wave (EW) propagation in wood (Picea abies spp.). Based on measuring of tree rings width a FE model of wood with defined tree rings, substituted as an ideal annulus, was created. FE model was loaded to force impulse at different positions via the specimen length. Subsequently a propagation and travel timeof the EW through a material was observed. FE simulations were compared to the experimental ones acquired by different non-destructive acoustical tools (ADD, Geotron, FAKOPP and TICO). Results say that the FE model preserves trend of velocities of EW obtained from experiments, although comparing to them it embodies lower EW velocities in general.
AnotaceCz:
KodOborRIV: JN
VlastnikZaznamu: UTAM-F
OdevzdaniDoRIV: 1
RokVydani: 2010
RokSberu: 2011
PocetCitaci: 0
© ÚTAM AV ČR, v. v. i. 2008 | přihlásit se ( pouze pro zaměstnance)