Publikace
Výběr podle způsobu zveřejnění:
A: Abstrakt (10)
A2: Abstrakt ze sborníku (15)
B: Monografie kniha jako celek (37)
D: Dizertace (12)
H: Konferenční sborník (tuzemská konf.) (4)
J: Článek v odborném periodiku (464)
K: Konferenční příspěvek (tuzemská konf.) (84)
M: Část monografie knihy (68)
N: Článek v novinách (4)
R1: Recenze z periodika (3)
R2: Recenze ze sborníku (3)
V: Výzkumná zpráva (96)
Z: Poloprovoz, ověřená techn., odrůda/plemeno, léčeb. postup (1)
Všechny publikace (801) Kytýř Daniel, Doktor Tomáš, Jiroušek Ondřej, Zlámal Petr, Pokorný D.
Sysno: 353150
ZpZverejneni: J
AutoriVsichni: Kytýř, D. - Doktor, T. - Jiroušek, Ondřej - Zlámal, Petr - Pokorný, D.
AutoriAV: Jiroušek, Ondřej - Zlámal, Petr
AutoriVsichniPocet: 5
AutoriAVPocet: 2
BiblCit: Kytýř, D. ; Doktor, T. ; Jiroušek, Ondřej ; Zlámal, Petr ; Pokorný, D. Experimental and numerical study of cemented bone-implant interface behaviourh. Frattura ed Integrita Strutturale, 2011, Roč. 15, č. 15, s. 5-13. ISSN 1971-8993.\nhttp://www.gruppofrattura.it/index.php?option=com_content&task=view&id=90&Itemid=284
BiblCitZdrD: Frattura ed Integrita Strutturale, 2011, Roč. 15, č. 15, s. 5-13
ISBN_ISSN_ZdrDok: 1971-8993
ZemeZverejneni: IT
Jazyk: eng
PocStran: 9
ProjektyCEP: GAP105/10/2305:GA ČR
VyzZamer: CEZ:AV0Z20710524
OrigNazev: Experimental and numerical study of cemented bone-implant interface behaviourh
KlicSlova: bone-cement interface - computed tomography - hip simulator - crack detection
AnotaceOrig: The aim of the research was to investigate the cemented bone-implant interface behavior. The main problems (cement layer degradation and bone-cement interface debonding) during physiological loading conditions have been investigated using a custom hip simulator. The experimental setup was designed to allow cyclic loading of the sample of pelvic bone with implanted cemented acetabular component. The hip contact force of required direction and magnitude was applied to the implant using a spherical femoral component head. The most unfavorable activity (downstairs walking) was simulated. The process of damage accumulation in the fixation was monitored by repeated scanning using high resolution micro Computed Tomography. Use of micro-focus source and large high-resolution flat panel detector allows investigation of structural changes and crack propagation both in the cement layer and the trabecular bone.
AnotaceCz:
KodOborRIV: FI
VlastnikZaznamu: UTAM-F
OdevzdaniDoRIV: 1
RokVydani: 2011
RokSberu: 2011
PocetCitaci: 0
Sysno: 353150
ZpZverejneni: J
AutoriVsichni: Kytýř, D. - Doktor, T. - Jiroušek, Ondřej - Zlámal, Petr - Pokorný, D.
AutoriAV: Jiroušek, Ondřej - Zlámal, Petr
AutoriVsichniPocet: 5
AutoriAVPocet: 2
BiblCit: Kytýř, D. ; Doktor, T. ; Jiroušek, Ondřej ; Zlámal, Petr ; Pokorný, D. Experimental and numerical study of cemented bone-implant interface behaviourh. Frattura ed Integrita Strutturale, 2011, Roč. 15, č. 15, s. 5-13. ISSN 1971-8993.\nhttp://www.gruppofrattura.it/index.php?option=com_content&task=view&id=90&Itemid=284
BiblCitZdrD: Frattura ed Integrita Strutturale, 2011, Roč. 15, č. 15, s. 5-13
ISBN_ISSN_ZdrDok: 1971-8993
ZemeZverejneni: IT
Jazyk: eng
PocStran: 9
ProjektyCEP: GAP105/10/2305:GA ČR
VyzZamer: CEZ:AV0Z20710524
OrigNazev: Experimental and numerical study of cemented bone-implant interface behaviourh
KlicSlova: bone-cement interface - computed tomography - hip simulator - crack detection
AnotaceOrig: The aim of the research was to investigate the cemented bone-implant interface behavior. The main problems (cement layer degradation and bone-cement interface debonding) during physiological loading conditions have been investigated using a custom hip simulator. The experimental setup was designed to allow cyclic loading of the sample of pelvic bone with implanted cemented acetabular component. The hip contact force of required direction and magnitude was applied to the implant using a spherical femoral component head. The most unfavorable activity (downstairs walking) was simulated. The process of damage accumulation in the fixation was monitored by repeated scanning using high resolution micro Computed Tomography. Use of micro-focus source and large high-resolution flat panel detector allows investigation of structural changes and crack propagation both in the cement layer and the trabecular bone.
AnotaceCz:
KodOborRIV: FI
VlastnikZaznamu: UTAM-F
OdevzdaniDoRIV: 1
RokVydani: 2011
RokSberu: 2011
PocetCitaci: 0
© ÚTAM AV ČR, v. v. i. 2008 | přihlásit se ( pouze pro zaměstnance)